Tharollo e Tloaelehileng

Litharollo tse Tloaelehileng tsa Pontšo ka SindaMotlatsi oa Hao oa Moetsi oa Tharollo ea Pontšo e Tloaelehileng e le 'Ngoe

Ho Sinda, re lumela hore projeke e 'ngoe le e 'ngoe e ikhethile, 'me lipontšo tsa hau li lokela ho bontša botho boo. Joaloka moetsi ea ka sehloohong oa LCD, re ikemiselitse ho fana ka tharollo ea ponts'o e lumellanang le lihlahisoa tsa hau, ho ntlafatsa ts'ebetso le botle bo botle. Hore na o ntse o ntlafatsa sistimi e teng kapa o rala sehlahisoa se secha, re fana ka litharollo tsa maemo a holimo tsa tloaelo ho fihlela litlhoko tsa hau tse ikhethileng.

Lisebelisoa tsa "touchscreen".

Ntlafatsa boiphihlelo ba hau ba mosebelisi ka theknoloji ea capacitive kapa e hanyetsanang le sekirini sa touchscreen. Re tla lokisa botenya ba khalase kapa sebopeho sa phanele ea ho ama hore e lekane hantle moralo oa hau.

Cable

Fetola bolelele, boemo, le pinout ea lithapo tsa hau kapa eketsa likhokahanyo tse ling. Fumana tharollo ea cable e etselitsoeng ho etsa hore likhokahano tsa hau li be bonolo le ho sireletseha.

Sehokedi

Re ka kenyelletsa HDMI, USB, SPI, VGA le tse ling ponts'ong ea hau ho fihlela sepheo sa hau sa moralo le ts'ebeliso.

Li-keypad

Eketsa lesela le koaheletsoeng, letlapa la membrane le nang le matšoao a LED kapa keketso e thata ea mochini oa silicone.

Tloaelo Backlight

Litlhophiso tsa mabone a morao-rao a tloaelehileng a ka etsoa ka motlakase / ho kenya hona joale, khanya kapa mebala / NVIS. Mohlomong e mpa e fetola mofuta oa kopano ho tloha ho lihlopha ho ea ho li-LED tse ka thōko.

Koahela Lisebelisoa tsa Khalase

Hlomella ponts'o ea hau ka khalase ea sekoaelo e ikhethileng ho ntlafatsa ho tšoarella. Khetha ho tsoa ho mefuta e fapaneng ea botenya ba khalase 'me u fumane bonding ea optical ho itšireletsa khahlanong le mongobo le litšila.

Ho kenya Li-add-On

Mehlala e ka kenyelletsa li-bezel, li-gaskets, likoti tse tloaelehileng, masakaneng a tšepe, li-standoffs tse entsoeng ka khoele kapa sekhomaretsi sa khatello ea maikutlo (PSA).

Sehokedi

Fetosa lihokelo life kapa life habonolo skrineng ho fihlela litlhoko tsa sesebelisoa sa hau. Ho solder bakeng sa lihlooho tsa phini, lihlooho tse nang le mabokose, lihlooho tsa li-angles tse ka ho le letona, le likhokahanyo life kapa life tseo ponts'o ea hau e ka li hlokang.

Liphetoho tsa PCB

Khetha ho tsoa mefuteng e mengata ea liphetoho tse kenyelletsang sebopeho, boholo, pinout, le sebopeho sa likarolo tsa PCB ea hau ho etsa hore e lekane hantle ts'ebeliso ea hau.

Libopeho le Boholo

Khetha ho tsoa mefuteng e fapaneng ea libopeho le boholo ho kopana le litlhaloso tsa hau, ebang ke tsa lits'ebetso tsa indasteri kapa lisebelisoa tsa elektroniki tse ka aparoang. Likhetho li kenyelletsa meralo ea khutlonnetsepa, lisekoere, le selikalikoe, ho netefatsa hore ponts'o ea hau e lumellana hantle le litlhoko tsa hau.

Mokhoa oa ho Beakanya Pontšo ea Hao

Moralo oa ho taka le ho Tiisa

Ntlafatso ea Mohlala

Mohlala o tiisitsoe

Tlhahiso ea 'Misa

Ho tsamaisa ka sekepe

Tšebeletso ea ka mor'a thekiso

Tsoelo-pele ea Tšebeliso ea Basebelisi

Moralo oa ho taka le ho Tiisa

Tharollo ea moralo oa mojule oa 1V1 LCD o leka-lekane pakeng tsa sebopeho, ts'ebetso le likarolo tse hlahisoang ke baqapi ba rona ba litsebi le baenjiniere.

Ntlafatso ea Mohlala

Sehlopha sa rona sa baenjiniere ba nang le phihlelo se hlokomela mokhoa oa ho lokisetsa tlhahiso.

Mohlala o tiisitsoe

Mehlala e netefalitsoeng le liteko li netefatsa hore sehlahisoa se lumellana le litlhaloso tsa bareki.

Tlhahiso ea 'Misa

Ts'ebetso e sebetsang le e sebetsang ea moralo ke basebetsi ba rona ba nang le boiphihlelo ba nang le lits'ebeletso tse tsoetseng pele, tse laoloang ke lienjiniere tsa litsebi le thekiso.